Slippers-boots "Bunnies". Master Class. How to sew slippers from fleece with your own hands? Patterns of children's slippers from fleece with sizes

We have a special attitude towards home shoes. Slippers are associated with home comfort, relaxation with the family, warmth and comfort for tired feet. Often they are dreamed of during the working day by ladies who are forced to wear high heels in the office, and those who wear boots or heavy shoes at work, and dandies in narrow shoes. For some, a symbol of simple happiness is a dog that meets the owner with slippers in his mouth. Slippers begin their history from the eastern harems, where soft silent shoes were worn by their inhabitants. In Europe, in boudoirs, elegant, decorated with exquisite embroidery, cozy slippers have become fashionable. Well, in the 19th century, slippers turned into a familiar and necessary item for everyone.

And in order to sew such slippers, you can take a special pattern for printing on thermal transfer under the cut. Its use greatly simplifies and speeds up the process and reduces almost to zero all possible difficulties and errors when cutting parts.

In addition to the pattern, you will need a light-colored felt to transfer the transfer, any suitable (I only had white today) felt for the insole and, my main inspiration for this week is a cork sheet. In this case, 3 mm thick. Well, glue, I liked to use Moment Crystal the most.

First of all, we will transfer the pattern to felt. Due to the fact that recently I have been asked more questions about translation technology, I will allow myself to say a little more about it today.

To begin with, we will need to place the pattern face down in the felt and heat the iron to almost maximum temperature. With a hot iron, we begin to carefully iron the sheet, not missing the edges of the corners.

In my opinion, it’s better to overheat the iron a little and notice during ironing that the felt began to melt (this is not an instant process and you will always have time to slightly reduce the heat, nothing bad will happen), than to iron everything with a cold iron and get a fragmentary translated image, the most ruining both the pattern and the felt.

We stroke the entire structure for about a minute, then cool it to a slightly warm state and remove the top checkered layer of paper. The picture has been translated.

Cut out the details of slippers without seam allowances.

Since I made the pattern as universal as possible, I adhered to the principle “more is better than less”. Therefore, at this stage of work, I recommend trying it on at least approximately and if it turns out to be larger than necessary, trim the sides, as shown in the photo. The size of the top and bottom, as a rule, does not need to be reduced, only if these are slippers for the baby.

Patterns for both slippers are placed on a sheet of felt. It is no longer necessary to take white, you can use any color.

And attach the details with a semicircular seam. Only along the top edge.

Now we cut out along the contour of the detail, getting a double top for future slippers.

Now we need a pattern for the insole. It is very easy to get it. It is enough just to circle your foot on a piece of paper with a decent margin, or just take any ready-made slippers that you find the most comfortable and circle the sole with it.

We only circle the insole, but do not cut it out. It turned out to be more convenient for me to sew in this sequence.

Now we take a double top slipper. We take two approaches, starting each of them from the middle of the toe.

On sour cream it will be very easy to sew the top. After completing the machine stitch, you can pull out the running thread.

Now slippers with an insole can be cut out, retreating 2-3 mm from the edge of the line. We do the same with the second slipper.

Now it's time to move on to the final step. We will make the sole for slippers. After various searches for suitable material, I settled on cork. As practice has shown, this is a fairly easy-to-use material, very light. In the sock, it is very practical, especially in the glued version. Cork has good shock-absorbing properties and even a thin layer of cork is sufficient to make it comfortable to use slippers.

We take glue and properly lubricate the bottom surface of the felt insole. The glue, among other things, perfectly stabilizes the cork, reducing its brittleness and preventing the possibility of cracks during bending in the future.

Glue the insole to the cork sheet. We cut it roughly enough, just to be able to put clips.

The cork is glued well and quickly, after the glue grabs tightly, you can remove the clips and cut the slippers along the contour of the insole.

You can stop at this stage of work or additionally stitch the perimeter of the slipper on a sewing machine. The cork is sewn very easily, despite the thickness.

That's all, slippers are ready. In the next photo, I tried to demonstrate that the cork glued to the felt is strong enough to bend.

The slippers turned out like this:

This house slippers idea will come in handy for anyone who has frequent guests. After all, sharing your home shoes with guests is not only bad form, it is also unhygienic!

According to an elementary pattern of slippers, you can sew as many as you need. Those that will be intended for men, immediately make a large size.

YOU WILL NEED:

any dense fabric (felt, jeans, tarpaulin, leatherette ...).
paper for making patterns.
scissors, thread, needle.
sewing machine.

PERFORMANCE:

Draw a pattern on paper. No need to draw the left and right slippers separately, just turn the pattern over and cut out the blanks.
Using a sewing machine, sew the edges of future slippers.
The sole can be additionally sealed with felt insoles and sewn to finished slippers with a regular overcast seam.
Slippers are ready!

Show your imagination! You can create a real exclusive collection! A big plus of these slippers is that they can be washed in a washing machine.

Slipper patterns:

These patterns will help you sew wonderful room slippers. If necessary, you can change the size of the details.

And finally, this master class in pictures will tell you how to sew soft slippers. In such tapikas it is very comfortable to walk around the house in the cold season, and putting them on your feet after bed is a pleasure - not chilly. All you need is slate soles (new or used), terry towels (again, new or old), faux leather and batting.

From the tools you will need:

Sewing machine, scissors for cutting fabric, marker for marks, needle (awl), breadboard knife, centimeter.

Progress

We cut out tracks from the skin, according to the layout of the slates.
Now cut out the sides.
According to the traces, we cut out blanks for the toe of slippers.
Now we need to sweep the sole and sock from the blanks. We put the batting in the middle of the terry blanks.
At the next stage, we are preparing a box for slates, the soles of the slates will be inserted into such boxes.
After the soft parts are assembled and sewn, we insert the shales through the unsewn part of the back into the body of the slipper, after which we sew the product.

Nowadays, many people have problems with shoes, including home shoes. That is, people cannot buy comfortable slippers or slippers at home. But the legs after work or study so need rest. Therefore, we asked ourselves the question: how to sew home slippers.

And not just indoor slippers, but the original model. How to make slippers with your own hands in the form of Mice and Dogs - see the master classes. In addition, here you will find patterns for slippers of any size, from 36 to 45.

Such original slippers, similar to mice, are quick and easy to sew. Before sewing slippers, let's look for material for them. What can be taken as a sole: the tops of old boots or boots, leather from an old bag, fabric from an old backpack or briefcase, suede or thick cloth.

Take an inventory of old things - and you will surely find something suitable for sewing slippers. According to the principle of our master class, you can sew both children's and adult slippers.

“Ears” can be removed or made smaller and sharper - then it will turn out not to be a Mouse, but a Cat. Even a beginner seamstress can sew such slippers. If you don’t have a sewing machine, sew on your hands, with a “needle forward” seam.

For work you will need:

A piece of dense fabric (cloth, denim, felt, drape, corduroy, and so on).
A piece of leather for the sole.
Foam rubber or batting (you can cut a synthetic winterizer from an old jacket).
Needle, kapron threads.
Threads for embroidery.
Fleece or artificial fur for the insole and lining of slippers.
Paper, pencil.
Tailor's pins.

In order to sew slippers with your own hands - you need a pattern. To do this, we take our most comfortable and wide shoes or the shoes of a child, in this case a clog, put the shoe on paper and trace the sole with a pencil.

We take a sheet of paper and wrap it over the shoe. Trace around with a pencil and cut out the top of the template.

So, we cut out: 2 blue parts from cloth or fabric for the top, 2 white parts from fleece for the inside of the top, 2 parts from fleece for the insole, 2 children. for the sole, 4 blue parts for the ears (here you can choose from a larger and smaller version of the ears). Do not forget 0.7-1 cm - allowances for seams. In addition to these parts, you need to cut 2 parts from foam rubber for the sole.

We sew the ears - we sew them with small stitches with a contrasting thread.

Then we embroider the “muzzle” of the Mouse, cut out the nose from the fabric, sew on beads or buttons instead of eyes.

The ears need to be folded at the base as shown in the photo, and stitched with a few stitches. On top of our design we impose a white piece of fleece face to face. Then both parts are sewn, retreating 1 cm from the edge. We sewed the insole and upper together. Now you need to sew the sole.

We sew and stitch along the edges, stepping back from the cuts 0.7-1 cm. We leave the bottom not stitched - we still need to insert foam rubber here.

Then, turn the slippers inside out. It remains only to insert foam rubber or batting inside. To do this, we take our 2 parts, cut out of foam rubber using a stencil, and insert them inside the slippers.

Holding the foam rubber, we fasten the heel with pins and carefully sew the remaining unsewn piece of the sole. Homemade slippers, sewn with your own hands - ready. If you like it, you can sew slippers with different ears: with round ones - like bears, long ones - like bunnies, wide ones - like dogs.

Slippers Dogs - mk

The second option for self-sewn slippers is Dog slippers. The pattern is suitable for sizes 35 and 37. When you cut the upper part of the shoe, pay attention to the width of the part (it seems to us that the width needs to be reduced by 1-2 cm). However, everything is very individual - many people like loose shoes.

On the diagram, the 35th size is indicated in red, and the 37th is marked in black, the slippers of the 35th size have open toes. Do-it-yourself dog slippers differ from previous slippers in that here the firmware goes along the top of the product.
For work we need:

Fabric for the insole (cotton, coarse calico, bike, and so on)
A strip of fabric for finishing.
Narrow ribbon for bows.
Sintepon.
Sole made of leather, leatherette, cloth, suede, etc.
Paper, ruler, pencil.
Scissors.
Nylon threads and thread for embroidery.

We will start the master class with the manufacture of a stencil. On sheet A4, we outline the points of the pattern and draw the details of the desired size. Cut out a paper stencil. We impose a stencil on the fabric, folding the fabric in 2 times. We need 4 parts for the insoles. Please note the details are different.

You will get 2 parts of the left, and 2 parts of the right slipper. And according to the same pattern, we cut out 2 parts from the padding polyester. We fold the blanks as in the photo, in the middle - a synthetic winterizer.

We chip off with pins and sew on a typewriter or manually.

We sew the sole to the workpiece, stepping back from the edge of 0.5-0.7 cm.

Cut out 4 top pieces according to the template. Fold inside out. We make out the “nose” and stitch it in a circle at a distance of 0.5 cm from the edge of the part.

We sew on buttons - eyes, we make out the upper cut with a strip of fabric.

We apply the finished top to the insole, pin it with pins and try it on the leg. If the depth of the top suits, we sew around at a distance of 0.5-0.7 cm.

We cut out the ears arbitrarily - 4 identical parts. Sew around.

Sew the ears to both sides of the top. Embroider the mouth with colored thread.

The product is ready. You can decorate the ears with bows.

Ready-made patterns of slippers for all sizes

Patterns for sizes from 36 to 45, you do not need to add allowances for the seams.

We all want to feel comfortable and cozy at home. To do this, we equip our home in every possible way, creating a cozy space for relaxation from it. We wear clothes that are pleasant to the touch, maybe not according to the latest fashion trends, but so necessary that we don’t want to take them off for as long as possible. Warm clothes, of course, are good, but what about slippers, because they are so necessary. Buying slippers is easy, but you will spend a lot of time looking for them, overpaying a decent amount of money. Why not sew warm fleece slippers on your own, adding a twist of the author's performance? It is from our article that you will learn how to sew fleece slippers with your own hands, you can take ready-made patterns or make them yourself.

Bunny Slippers

The unusual design of these slippers sets them apart from the rest of the shoes for the house. They look funny and a little childish, but at the same time very comfortable and extremely pleasant. The main secret of the design of such slippers lies in the hanging ears and fluffy cute tail. They make such indoor shoes in the form of socks that perfectly warm the legs to the knee line. Any woman can sew such bunny slippers. In a detailed master class, we will share instructions on how to sew original fleece slippers at home.

materials

For work, we will prepare the necessary materials and tools:

Fleece in two colors (for the inside and outside of the boot).
Sole fabric (raincoat fabric, leatherette, jeans and other dense fabrics).
Insulation.
Pattern paper.
Cleaving pins.
Needle.
Threads in two colors.
Ordinary scissors.
Zigzag scissors.
Soap for drawing on fabric.
Sewing machine.

As the main fabric, you can use any soft fabric, such as velor or plush and others.
For the soles, it is better to put a waterproof fabric so that you don’t have to worry about dry feet in the bathroom.
If you plan to just watch TV or read a book on the couch in these slippers, then you can use the same fleece or felt for the sole.
As a heater, you can use a synthetic winterizer, which will not only warm your slippers well, but also give the desired shape to the product.

Master class on pattern making and sewing:

The pattern consists of three parts: soles, sidewalls and shaft details. We sew an inner boot. We redraw the pattern on fleece, cut it out with a seam allowance of 1 cm.
After that, we need to cut out 2 rectangles for our bootleg.
We chop off the details with pins with the front sides, sew. So we get two soles with sides of different colors.
Now, on rectangular fleece blanks, we cut off the seam allowances, connect the upper and lower parts of the product, grinding the back.

Important! Remember to leave a small opening so that you can turn the slippers inside out at the end of the work.

We cut off the resulting allowances, which turned out along the ankle line.
Now we need to attach the insulation to the slippers. Trim off excess material.
We chop together the lower and upper parts of slippers with the right sides to each other.

We grind and cut the seam allowances using special zigzag scissors. If you do not have such scissors, then make notches on the bends of the product.
We do the same manipulations with the external details of home shoes, leaving no holes for further eversion.
We glue the selected material for the sole with interlining. So we have to cut out 2 parts of the sole.
Now we need to cut out the details of the ears for the bunny and stitch them right sides to each other.
We twist the ears and make a neat line, retreating 5 mm from the edge.
Attach the ear to the front side of the inner boot. Do not forget to take into account the fact that the eyelet will be outside the slipper during the subsequent eversion.
We do the same actions with the second ear, we attach it on the other side of the boot.
Now we need to unscrew the outer part, insert it into the inner part and secure it with pins along the top of the product. We fold all the details with the right sides to each other.
We grind everything along the upper edge and again cut off the seam allowances.
We turn the bunny slippers through the hole we left.
Sew up the hole using a hidden seam.
Now we insert the inner slippers into the outer one.
In the center from the very top we sew our boots, stopping at the center.
We pull the bottom edge of the thread, forming visible folds on the front side of the boot.
We fix and hide the threads inside the product.
We make 2 pompoms for the tail. You can use the same fabric and stuff it with cotton or take a ready-made fur bubo.
Sew the tails to the back of the slippers.

Stylish slippers are ready!

Important! Such home shoes can be sewn without ears, decorated with satin ribbon or beads.

Bunny slippers for baby

Now we will look at step-by-step instructions for sewing funny slippers for your crumbs. Why not? They are very warm and comfortable! Moreover, such slippers are worn for a long time and lend themselves well to washing without losing their original shape. We are sure that your little fashionista will love these mischievous slippers.

So, let's start sewing children's slippers:

Cut out 3 pairs. The upper part should be made of bright fabric, and for a soft inner lining, use fur or any woolen fabric.
We chop together the fabric and insulation, and then we sew them on a typewriter, making a small indent from the edge.
Now we need to connect the sole and the top of the product. If you don't have a sewing machine, sew the two pieces by hand with a buttonhole stitch. You can make both visible and invisible line of the bottom line of slippers - as you like.
Now it's the turn of the muzzle and ears of the bunny.
First you need to embroider the eyes, nose and antennae on a fabric that is the same color as the top material. For this work we use black threads.
We pin a piece of fabric with embroidery up the slipper and sew it on by hand.
We slightly bend the previously made ears at the base and sew on the sides of the product.

Wonderful do-it-yourself boots for a baby are ready to serve their little master.

Important! On the theme of animals, you can make a lot of different indoor slippers: cat slippers, mouse slippers, tiger cub slippers and others. It all depends on how your imagination can run wild!

Plain fleece slippers

This is the fastest and easiest way to sew fleece slippers. To work, we need fleece in two colors (patterned and plain) and additional tools (needle, thread, pins and scissors).

We begin to cut simple but warm slippers:

In mirror image, we cut out 3 parts (sole and sidewall) for the right and left legs. Don't forget to add 1cm seam allowances.
We sew the back seam at the top parts.
Now we need to fold the details of the upper part with the right side inside the slipper, stitch and turn out. If you have an overlock machine, then you can sew all the details with a knitted seam.
We fold the details of the sole in pairs with the wrong side inside the product.
Now we connect the upper parts with the sole, and then we sweep and sew with a sewing machine.
It's time to remove all the basting, thread the threads and turn the product inside out.

Hooray, your slippers are ready!

Important! To make a foot pattern, use the insole from your shoe as a template.

How to sew homemade fleece slippers with your own hands - patterns with sizes

Take the following materials and tools:

Special pattern for printing on thermal transfer.
Pattern for the insole.
Colored and light felt.
Cork sheet 3 mm thick.
Fast drying adhesive.
Iron.
Scissors.
Needle.
Threads.
Stationery clips.

Step-by-step workflow to sew fleece slippers with your own hands:

We need to translate the pattern for printing on felt. To do this, lay the pattern face down on the fabric and heat the iron to the highest temperature. We pass with a hot iron over the entire surface of the printed image, not missing the corners and edges of the sheet.
We iron the entire paper pattern for about a minute, cool a little and carefully remove the top cell layer. Now our picture is transferred to fleece.
Cut out all the details of the slippers, excluding seam allowances. We recommend trying on the upper part of the product at this stage so that you can cut off the excess fabric.
Now you need to mark the patterns for a pair of slippers on felt. Since the material will be on the inside of the product, you can take a fabric of absolutely any color.
Using a semicircular seam, we sew all the details.
We cut out our 2 parts along the contour, which will be the top of future slippers.
We create a pattern for the insole, which can be taken by tracing the soles of old slippers or any of your shoes. It is important only to circle the insole, but not cut it out.
Next, you need to baste the top of the slipper to the pattern of the foot, starting from the middle of the toe of the product.
We carry out the machine line and pull out the marking thread.
Now slippers with a sole can be cut out, retreating 3 cm from the edge of the line.
We do the same actions with the second tobacco.
Now we need to apply superglue to the fleece sole and stick it to the cork sheet.
Cut out the slippers so that the cork surface protrudes beyond the edges of the felt.
We fix the cork and fleece layer with clerical clips, wait for the glue to dry completely.
We cut our slippers along the contour of the insole, cutting off the excess lower part that goes beyond the boundaries of the product.
You can stop at this or additionally flash slippers around the entire perimeter.

Important! When transferring a pattern to felt from a special pattern, it is better to overheat the iron, because if you iron the pattern with a cold iron, you will get only fragments of the translated image, and this can completely ruin the pattern itself and the felt.

At home, you always want to feel cozy and comfortable. To do this, we equip our nest, make our house our fortress. We also wear nice clothes, maybe not always fashionable and stylish, not from the latest collections of popular fashion houses, but necessary ones that you can wrap yourself in and don't want to take off. One of the elements of home wardrobe are slippers. The desire of women to look chic even at home has led to the creation of shoes such as bunny slippers. The unusual design of these slippers makes them stand out, they look a bit childish and fun, but at the same time very nice and comfortable. You can even make such shoes at home, there would be a desire!

Such house bunny slippers enthuse everyone. First of all, thanks to their design, they are madly in love with children, and it is the kids who are sometimes so difficult to get to put on slippers. These are worn with pleasure: hanging ears and a fluffy cute tail are the main secret of design. Of course, you can add slippers with a variety of decorations: beads, ribbons, or you can continue to design a bunny, not limiting it to ears alone, but making a whole muzzle! Children will be very happy with such slippers. Yes, there are children! Many girls have long acquired such slippers and consider them one of the best home wardrobe items.

Also, the material will pleasantly surprise you. Mostly fluffy, silky and soft material is used - fleece, plush or velor. The basis of the sole is made of leatherette, which does not allow water to pass through, which makes the slippers suitable for both the kitchen and the bathroom. A synthetic winterizer is also very often used to insulate slippers, and it is also an excellent material for shaping slippers. Such slippers are usually made in the form of socks that fit the legs and do not fall off. And, of course, these slippers perfectly warm your feet in the cold period of time. Especially since how to sew bunny slippers almost every woman knows.

Another plus is the coloring. Slippers can be found in all colors of the rainbow and more. Very often two colors are used: one for the inside and the other for the outside. Ideal combinations are: pink and gray, yellow and black, blue and white, lemon and beige, coffee and coral. These slippers are worn for a long time, they can be washed and at the same time they will not lose their shape. There are two most popular options for slippers: traditional and in the form of boots. But at the peak of fashion now are slippers-boots.

DIY bunny slippers: pattern and instructions

The best things are handmade things. Of course, not all of us can boast such skill as needlework, but there are things that are really worth trying to do with your own hands. Moreover, the instructions below are very easy to use and you will definitely succeed. easy to do at home, just follow these simple instructions.

You need:

First, choose a fabric. The fabric will need two colors: for the inside and outside. Ideally, take velor or fleece, but any fabric that is pleasant to the touch will also work. Choose what you like first.
For the sole - leatherette, raincoat fabric or other dense fabric.
Needles, pins, scissors, pattern paper, a marker and a sewing machine! Stock up on everything you need so that at the most inopportune moment you do not have to look for the simplest things.

The base pattern is three parts. Also, don't forget to cut out the ears! After all, it is the ears that are the very distinguishing feature that will distinguish these slippers from ordinary ones.
Slippers consist of three layers: for the first layer we take velor or fleece, this will be the top. Still need an inner layer and lining. The inner layer is a synthetic winterizer, it gives shape and insulates, but this layer is not required. Take the sole ready, but not thick so that the sewing machine can take it, or do it yourself.
In the case of using an old sole, cut off the top from it, and cut out the part you need from the remaining material, then the main part. You see half of the part on the pattern, and you need to first circle this half, and then also in a mirror image. Cut out the resulting part. But remember that you need to leave seam allowances for all layers of slippers. Open the shaft in the same way. The synthetic winterizer is not used for the sole pattern.

Now let's sew!

For each layer, we sew all the details separately. Then we collect them in accordance with the contour formed by the sole.
Don't forget the ears! We sew them, and then we insert them, we make the last finishing seam.
You have slippers from the inside out. We turn them on the front side. We make soft folds on the top of the slippers.
After you have sewn on the ears, your bunny slippers are ready! Bunny slippers master class a simple solution to a wonderful thing.

Bunny slippers are ideal for the whole family, and especially for children. If you know how to knit, it will not be difficult for you to make such knitted baby bunny slippers to your baby. To begin with, you knit ordinary slippers on five knitting needles, but at the same time leave holes for bunny ears. Then we sew on the ears, and if this is not enough, we add the whole muzzle. Also on the theme of animals there is where to roam fantasies! If your child prefers squirrels or tiger cubs, small modifications, and you get squirrel slippers and tiger cub slippers. Such indoor shoes will save your kids from most problems, primarily the banal, but such a nasty runny nose, as well as colds. After all, it is often hypothermia of the legs that leads to consequences. And with such beautiful slippers you won't have any problems! It is also a great gift, especially nice when it is made with your own hands.

But such bunny slippers can be sewn for a baby. They are so warm and funny! For example, I immediately liked it.

Cut out three pairs of pieces. The upper part is made of bright fabric, and use faux fur or woolen fabric as a soft lining.

Now sew the fur and fabric with a sandwich.

Use a sewing machine to be safe.

Use invisible shoes to hold the sole pieces together.

Now connect the sole and upper.

The bottom can also be sewn on by hand if that makes it easier.

Now it's the turn of the muzzle and ears.

Embroider eyes and nose onto the fabric.

I used black thread for this.

Invisibly pin to the slipper and sew the muzzle by hand.

Bend the ears at the base and sew to the slippers.

These are such wonderful warm boots for a baby!

Hello, my dear seamstresses)) Today I will share my experience and pattern of children's slippers. As always, I catch myself thinking that I can’t just go and buy slippers for my child, because it’s so simple ... But I can’t do it inside)))), I really want them sew with your own hands, moreover, as a rule, this kind of thing is sewn from applied materials, that is, from what remains in small cuts in the bins.

Can sew slippers from old jeans, sheepskin coats, furs, fleece, etc.

I am for these children's slippers chose the following materials:

jeans - on the sole
synthetic winterizer - for insulation

synthetic winterizer for insulation

The next step:

Then we sew on a typewriter:

Here's what should happen:

So give joy to your children and sew such cute DIY slippers:

Below, I decided to still make a small selection of funny and cute faces for children's slippers:

How to sew slippers for children. Pattern for 16-18-19.5 cmHello, my dear seamstresses)) Today I will share my experience and pattern of children's slippers. As always, I catch myself thinking that I can’t just go and buy slippers for my child, because it’s so simple ... But I can’t do it inside)))), so I want to sew them with my own hands, besides, as a rule, this kind of thing is sewn from applied materials, that is, from what remains in small cuts in the bins.

You can sew slippers from old jeans, sheepskin coats, fur, fleece, etc.

I chose the following materials for these children's slippers:

jeans - on the sole
fleece - on the upper and inner part of the sneaker
synthetic winterizer - for insulation

In terms of warmth, these slippers can be compared with slippers made of sheep's wool.
Pattern of slippers on the leg 16.5; 18.5; 19.5 cm
On the Internet, I got this good pattern:

But it didn’t fit me perfectly, so I made another pattern based on this pattern for the size of the slipper I needed - 18.5 cm. pattern slippers will turn out perfect.

In order to understand what size of slippers you need - put the child's foot on a piece of paper, circle it, and measure the extreme points with a ruler. Slippers can be made 0.5 - 1 cm larger than the size of the child's feet.
How to sew slippers with your own hands?
First, let's figure out what these slippers consist of? I need three layers of fabric for the upper part of the slippers - this is the outer fabric, the synthetic winterizer filler, and the inner fabric. We cut out the detail of the upper part from the blue fleece, the detail of the inner part from the black fleece, as well as the detail from the padding polyester. In total, 6 parts should be prepared for two slippers:

The sole of the slippers also consists of three parts:

from old jeans we cut out the part that will be in contact with the floor
synthetic winterizer for insulation
black fleece detail for the inside of the slipper

Then mentally “split” the already finished slippers into two slippers: one external (made of blue fleece with a padding polyester) and the other internal (made of black fleece). First we will sew the upper slippers.
You may also be interested in:

How to sew a skirt from old jeans?

Therefore, we fold a synthetic winterizer part to the wrong side of the blue fleece, and also apply a synthetic winterizer to the part of the gin sole:

Then we sew the upper part along the seam on the back side of the heel:

The next step:

we pin this upper part around the entire perimeter of the sole from jeans and synthetic winterizer, joining the fabrics face to face

Then we sew on a typewriter:

And turn the finished upper part of the sneaker inside out. It is necessary to make sure that the seam is of high quality on the front side, and there is no discrepancy between the layers anywhere, so that the synthetic winterizer does not stick out.

Using the same principle, we sew the inner slippers from black fleece:

In order to carefully sew the sole to the upper part, it is necessary to baste or chop it around the entire perimeter with pins, since the upper part is cut in such a way that it creates the necessary volume for the leg, but at the same time the upper part is superimposed on the lower part with little freedom. You will feel it as you sew at this stage.

And so that the upper part does not warp relative to the sole, it’s easier to sweep, so as not to rip it later (like me)))), I’m not a fan of basting)).

Here .... so do not make my mistakes, .... we pin it off:

Now it's time to sew both slippers together. To do this, we fix them at the top point of the seam on the heel, and put the outer slipper into the inner one face to face:

Here's what should happen:

And now attention! It would be ideal to just stitch along this section, just sew three layers of fabric with one seam, but it wasn’t there ... because then the slippers can’t be turned out already ...

Therefore, we sew the open cut, but not completely, leaving room for eversion from any part.

We turn the slippers on the front side, and sew the remaining cut manually or on a typewriter.

This is such a nice result.

My child was very happy with these slippers, it was especially fun waiting for him when he came up and asked all the time: “Well? Are the slippers ready?

So give joy to your children and sew such cute slippers with your own hands:

If desired, it was possible to paint some muzzle on them with acrylic paint on fabric, or sew ears to slippers, or make a semblance of paws, I just didn’t have time, because my child immediately put them on and ran))).
You will also be interested in:

How to sew jeans for a child from old jeans. Pattern for 2-4 years
Children's sweatshirt for height 92-104. Pattern, sew
Velcro fleece collar. Pattern
Do-it-yourself children's jacket (for height 98cm). Jacket pattern

Below I decided to still make a small selection of funny and cute faces for children's slippers: